Area 419 Rem 700 SA Improved Scope Rail - 20MOA - Full Slotted - Scope Base

The Area 419 ISR for Remington 700 Short Action gives precision rifle builders a scope rail machined to a higher standard than any factory replacement. Every mating surface is 1:1 matched to the Remington action profile, the integral recoil lug bears directly against the front receiver ring, and all corners are radiused off the machine with no sharp edges left.

The Area 419 Improved Scope Rail (ISR) is a one-piece 7075 aluminum Picatinny scope base for Remington 700 Short Action receivers, providing 20 MOA of built-in elevation cant and machined to MIL-STD-1913 specification.

The integral machined recoil lug bears against the front receiver ring to prevent base movement under recoil — a more reliable method than relying on screw torque alone. All mating surfaces are 1:1 machined to the exact Remington action profile for a solid, play-free fit. The base is compatible with both #6 (6-48) and #8 (8-40) screws without modification, covering the range of Remington 700 receiver variants. All screws are the same length, sized to not interfere with barrel threads — no guessing which screw goes where. An ejection port cut blends seamlessly into the action and provides clearance for top-loading ADL-style rifles. The Full Slotted profile runs Picatinny slots the full length of the rail without interruption. This design is compatible with all Picatinny scope mounts, including Spuhr and MPA mounts that use a center recoil lug. The MOA angle is guaranteed to be true to spec due to advanced machining fixturing. Bergara Premier fit note: serial number prefixes A00000–F00000 have a round action with a hood over the recoil lug and this rail will NOT fit. Serial numbers G00000 or higher use the Remington pattern with 8-40 holes and this rail WILL fit.

Designed for Remington 700 Short Action receivers. Compatible with #6 (6-48) and #8 (8-40) mounting screws. Includes (4) 6-48 and (4) 8-40 Torx T10 screws and wrench. Machined to MIL-STD-1913. #6 screw torque: 15 in/lb. #8 screw torque: 20 in/lb.

7075 aluminum, machined on a 4-axis HAAS VMC. Type III hardcoat black anodized. Integral recoil lug. All edges radiused. 20 MOA cant. Made in the USA.

A precision alternative to factory Remington 700 bases for builders who want a rail that is truly matched to the action and guaranteed to the MOA spec.

Area 419 machines every component of their mounting systems in-house in the USA, delivering the detail and precision that serious precision rifle builders require.